FT-MTA03 Accessories

FT-S Microforce Sensing Probe

FT-S Microforce Sensing Probes

The newest generation of FemtoTools FT-S Microforce Sensing Probes are microforce sensors capable of measuring forces from 200 millinewtons (0.2 N) down to sub-nanonewtons (10-9 N) along the sensor’s probe axis. Both compression and tension forces can be measured. The outstanding long-term stability and low signal drift guarantees significantly higher measurement accuracy than any other force sensing system in this force range. The accuracy of the FemtoTools SI-traceable calibration process is ensured by comaparitive measurements with the Swiss National Institute of Metrology (METAS).

Sensor Tip Options

  • Flat silicon tip with a tip size of 50 µm by 50 µm
  • Pointy tungsten probe tip with a tip radius smaller than 5µm, 2µm or 0.1µm
  • Spherical glass tip with a point radius of 25 µm
  • Spherical ruby tip with a point radius of 125 µm
  • Diamond nanoindenter tips (e.g. Berkovich, Conical, customized geometry)
Specifications & Features
 
Sensor Force Range Resolution @10Hz Minimum Order Quantity
FT-S200 ±200µN 0.0005 µN 5
FT-S2000 ±2'000µN 0.005 µN 5
FT-S20000 ±20'000µN 0.05 µN 5
FT-S200000 ±200'000µN 0.5 µN 5
 

FT-G Force Sensing Microgripper

FT-G Force Sensing Microgripper

The FT-G Microgripper series is designed to handle objects ranging from 0.001 mm to 0.1 mm. The initial openings of the gripper arms are 30 μm and 100 μm. Typical applications include sample preparation and microassembly tasks (pick-and-place).

The gripper opening can be controlled with nanometer precision, such that the gripper arms are fully closed upon applying the maximum actuation signal. Due to the electrostatic actuation principle, the gripper arms do not heat up.

The FT-G103 and the FT-G33 feature an integrated force sensor for closed-loop control of the gripping force (unique on the market). This enables the handling of fragile samples, the detection of (un)successful gripping, the detection of objects size and the measurement of the mechanical properties of the sample to be picked-up.

Specifications & Features

Gripper Opening Force Sensor Minimum Order Quantity
FT-G103 0-100µm Yes 5
FT-G33 0-30µm Yes 5
 

FT-S-LAT Lateral Microforce Sensing Probe

FT-S-LAT Lateral Microforce Sensing Probe

The FemtoTools FT-S2000-LAT Lateral Microforce Sensing Probe is a microforce sensor capable of measuring forces from one millinewton (10-3 N) down to several nanonewtons (10-9 N) perpendicular to the sensor’s axis. This off-axis measuring capability allows for the vertical micromechanical testing while observing both the sensing-probe tip and the sample under a top-view microscope. The individual calibration in combination with an outstanding long-term stability of the FT-S-LAT Lateral Microforce Sensing Probes guarantees significantly higher measurement accuracy than any other force sensing system in this force range.

Sensor Tip Options

  • Pointy tungsten probe tip with a tip radius smaller than 5µm or 2µm
  • Spherical glass tip with a point radius of 25 µm (learn more)
  • Spherical ruby  tip with a point radius of 125 µm (learn more)
Specifications & Features

Sensor Force Range Resolution @10Hz Minimum Order Quantity
FT-S-2000 ±2'000µN 0.02 µN 5

Products

Contact us: 480-758-5400


 

Captcha Code

Click the image to see another captcha.